Product Description
Supreme Solar 150 ETC SS
The Inner tank Supreme Solar 150 ETC SS models are of Stainless Steel SS304 Grade, hence Supreme Solar 150 ETC SS life of the solar water is much higher than other
Glass line solar water heaters are much reliable in harsh hard water areas. Glass line is a special coating which prevents rusting of tanks due to harsh hard water conditions.
Product available in 150 ETC SS, 150 ETC SS and 150 ETC SS litres capacity in ETC type systems
Supreme Solar models manufactured with high standard machinery and precision technology.
Supreme Solar
At Supreme Solar we are working on renewable energy with advanced technology to ensure your solar water heater gives you the maximum benefit. We use PUFF for Supreme Solar 150 ETC SS keeping solar water hot for a long time. Hence the water Supreme Solar 150 ETC SS is clean and hygienic as the tanks are glass enamelled coated.
With Supreme Solar it’s possible to contribute in making our environment pollution free and add to the green energy. Hence we are in the continuous process of upgrading our systems and machinery to international standards. To produce High quality solar systems for your residential and commercial purposes.
The Inner tank of these models are of Staleness Steel SS304 Grade, hence Supreme Solar 150 ETC SS life of the solar water is much higher than other
Product available in 150 ETC SS, 150 ETC SS and 150 ETC SS litres capacity in ETC type systems
Supreme Solar 150 SS Evacuated tube collectors[edit]
An array of evacuated tube collectors on a roof
Evacuated tube collectors are the most common solar thermal technology in China and in the World.[6] They make use of a glass tube to surround the absorber with high vacuum and effectively resist atmospheric pressure. The vacuum that surrounds the absorber greatly reduces convection and conduction heat loss, therefore achieving greater energy conversion efficiency. The absorber can be either metallic as in the case of flat plate collectors or being a second concentric glass tube (“Sydney Tube”). Heat transfer fluid can flow in and out each tube or being in contact with a heat pipe reaching inside the tube. For the latter, heat pipes transfer heat to the fluid in a heat exchanger called a “manifold” placed transverse in respect to the tubes.[citation needed] The manifold is wrapped in insulation (glass wool) and covered by a protective metal or plastic case also used for fixing to supports.
Glass-metal evacuated tubes are made with flat or curved metal absorber sheets same as those of flat plates. These sheets are joined to pipes or heat pipes to make “fins” and placed inside a single borosilicate glass tube. An anti-reflective coating can be deposited on the inner and outer surfaces of such tube to improve transparency. Both selective and anti-reflective coating (inner tube surface) will not degrade until the vacuum is lost.[7] A high vacuum tight glass-metal seal is however required at one or both sides of each evacuated tube. This seal is cycled between ambient and fluid temperature each day of collector operation and might lead to failures in time.
Technical Specifications
ETC Solar Water Heaters Technical Specifications
ETC solar water heater technical specifications
Tubes Specifications |
Vacuum Tube outer diameter |
47mm/58mm |
Vacuum Tube inner diameter |
37 mm&47mm |
Tube Length |
1800 mm. |
Tank Specifications |
Tank Insulation |
PUF 50mm (Polyurethane foaming). |
Inner Tank Material |
Stainless Steel 304 L grade 0.5 mm. |
Outer Tank Material |
Galvanized Powder coated/Stainless steel. |
Inner tank Diameter |
380 mm. |
Outer tank Diameter |
480 mm |
Tank Volume |
100 liters to 500 liters. |
General Specifications |
Temperature |
65 degrees C to 85 degrees C |
Stand frame |
Galvanized Powder coated |
Method of Welding |
Seamless and Non welding Technology. |
Type of Fasteners |
Stainless Steel / galvanized |
Type of Grommets |
Silicon rubbers. |
Type of Circulation |
Thermosiphon. |
Electrical Back Up |
2 KW & 3kw (optional). |
Type of inlet feeding |
Using gravity feeding tank for non-pressure, low mixing of hot and cold water, and long life of the inner tank |
Total Space Required For Installation |
2*2.5m (W*L). |
Stand Dimensions |
1050*1150*2160mm (H*W*L) |
FPC Technical Specifications
Collector Specifications |
Section |
1.2 mm thick Aluminium |
Back sheet |
0.46 mm thick Aluminium |
Flat plate collector |
Ultrasonic welded with Nalsun coating |
Header pipe |
Copper 24 SWG |
Insulation |
Fiber Glass wool |
Collector size |
1030*2030*100mm |
Foil |
0.05 mm thick Aluminum |
Glazing |
1000 X 2000 X 4mm clear toughened glass for Regular size & 960x1660x4mm clear toughened glass for small size collectors |
Glass beeding |
E.P.D.M. Rubber |
Grommets |
E.P.D.M Rubber |
Flanges |
Brass |
Tank Specifications |
Inner tank material |
2mm H.R sheet with co2 welding inside coated with prime guard coating / 3mm for pressurized systems. |
Outer tank material |
Pre-coated laminated sheet (color: Half white) / Mirror finish |
Tank Insulation |
50 mm thick PUF |
Side dish |
2.5mm for Normal / 3.5mm for PRD |
Connecting Pipes |
Stainless steel |
Tank Volume |
100 liters to 500 liters. |
End Caps |
GI with PP coating |
General Specifications |
Temperature |
Maximum 700c |
Fasteners |
Stainless steel |
Type of Applications |
Pressurized/ Non-Pressurized |
Stand Dimensions |
1050*1150*2160mm (H*W*L) |
Total Space Required For Installation |
2*2.5m (W*L). |
Glass Lined Technical Specifications:
Tube Specifications |
Vacuum Tube outer diameter |
47mm/58mm |
Vacuum Tube inner diameter |
37 mm&47mm |
Tube length |
2100mm. |
Tube Weight |
30kg.(For 220 LPD) |
Tank Specifications |
Inner tank material |
Enamel steel of 2mm &2.5 mm with the glass lined coating |
Outer tank material |
Powder Coated/Stainless Steel. |
Tank Dimensions |
1480mm. |
Inner Tank Diameter |
210mm. |
Outer Tank Diameter |
550mm. |
Tank Weight |
54.9kg.(For 220 LPD) |
Tank Insulation |
50mm high-quality PUF materials. |
Tank Volume |
110,165,220,275 LPD |
Inner Dish |
2.5 mm |
Outer Dish |
Aluminium with powder coated |
General Specifications |
Temperature |
65 degrees C to 85 degrees C |
Total Space Required For Installation |
2*2.5m (W*L). |
Total System Weight |
105kg (Approx).(220 LPD) |
Stand Dimensions |
1050*1150*2160mm (H*W*L) |
Stand Weight |
21kg (For 220 LPD) |
Frame Angle |
27 degrees |
Only logged in customers who have purchased this product may leave a review.
divya –
got it as per my friend suggestion, got the best deal
raghuram –
unbelevable service and great product
sujan –
quick service, installed as per my request
sapna –
ust go for it…Helpful for small as well as family of 5 members….Best brand energy efficiency you can enjoy continues shower too….time saver…..great service
subish n Kumar –
Installation was done with certified professional and product is amazing
subish n Kumar –
Installation was done with certified professional and product is amazing
sumit –
Will be judged best when it actually required to use.